Publicidad
Idiomas disponibles
Idiomas disponibles
USE WITH COMPUTER
Option 1:
1.
Connect the unit to a computer using the USB cable supplied.
2.
Connect the power cable to the power supply.
3.
Press the on/off switch on the Visualizer.
4.
The transmission can now be controlled by a supporting software, e.g. the
celexon Visualizer Software.
5.
The selection keys on the Visualizer cannot be used under these settings.
The control is done by the software used.
6.
With the built-in microphone, the document camera can also be used for
video calls or recording learning content, etc.
Option 2:
1.
Connect a computer to the document camera via VGA cable and use the
VGA input.
2.
Then connect the display device to the document camera using the VGA
cable and use the VGA output.
3.
Connect the power supply to the mains.
4.
When the document camera is switched off, the image from the computer
is displayed by the display device. As soon as you switch on the document
camera, the image from the camera is displayed on the display unit. Swit-
ching between the two sources is only possible by switching the document
camera on and off.
Hint:
The DK500 can be used with many PC softwares that support image input
devices such as USB webcams or scanners.
Mouse function:
You can operate the document camera with a computer mouse connected to
the USB interface. In addition, graphical comments can be drawn in the image.
7
Publicidad
