Publicidad
Idiomas disponibles
Idiomas disponibles
2) Installing the battery
Note
1) The battery will cause danger if it is connected incorrectly, so make sure that
the battery connection is done by a qualified person.
2) Check the condition of the battery and accessories before installing them.
3) Make sure the machine is turned off.
4) Keep the appliance away from sources of fire and heat.
5) The battery must be installed in a well-ventilated area.
6) Carefully put the battery in place, and then connect the wires properly.
Steps:
1) Unpack the machine and set it on the floor.
2) Remove the battery from the housing.
3) Unfasten the buckles on the battery box to open the cover.
4) Carefully insert the battery into the container and make sure that the battery
is horizontal. Then connect the battery socket to the machine socket.
5) Close the battery box lid and fasten the buckles.
1 - Unfasten the buckles
2 - Open the battery compartment cover
3 - Insert the battery
A - Battery connection cable
B - Machine socket
C - Battery socket
D - Charger
3) Mounting the brush
Note
• Do not use any control button when someone is touching the brush. Possible injury.
• Ensure that the scrubbing pad is placed in the center of the pad drive and screw the
pad drive bracket. After that, it is possible to work as follows.
Publicidad
