Publicidad
Idiomas disponibles
Idiomas disponibles
and disconnect the battery socket from the charger socket. Wait until the
rotating parts stop.
b)
Use only non-corrosive cleaning agents for cleaning surfaces.
c)
After each cleaning, all parts should be thoroughly dried before the device is
reused.
d)
Store the unit in a dry and cool place protected from moisture and direct
sunlight.
e)
Do not spray the unit with a stream of water or immerse it in water.
f)
Make sure that no water enters through the ventilation openings in the casing.
g)
Clean the ventilation openings with a brush and compressed air.
h)
Perform regular inspections of the unit checking technical fitness and any
damages.
i)
Do not leave the batteries in the unit when it will not be used for a long time.
j)
Use a soft, damp cloth for cleaning.
k)
Do not use sharp and/or metal objects (e.g. wire brush or metal spatula) as
they may damage the surface of the material from which the appliance is
made.
l)
Do not clean the unit with acidic substances, medical agents, thinners, fuel,
oils, or other chemicals. It may cause damage to the device.
Daily maintenance
After the surface cleaning work is completed:
1) Disconnect the machine socket from the battery socket.
2) Drain the dirty water from the tank and rinse it with clean water.
3) Check that the water suction hose is clean.
4) Wash the brushes and wipers, and then dry them.
Dirty water tank maintenance
• Clean the dirty water tank after each use of the machine. Remove tools and other
items from the tank lid. Then drain all contaminated water from the tank. Then rinse it
with clean water and dry it. Keeping the dirty water tank clean can prevent sludge or
foreign bodies from clogging the tank.
• Periodically clean the filter mesh.
Publicidad
