Publicidad
Idiomas disponibles
Idiomas disponibles
EN
INSTRUCTION MANUAL
COMPATIBLE WITH 12V LEAD-ACID BATTERY
This manual contains important safety and operating instructions
for 12V battery booster: Fulboost.
IMPORTANT SAFETY INSTRUCTIONS. Please read this manual and
follow the instructions carefully before using the booster.
WARNING
• This manual includes guidelines on the operation of your device and
the precautions to follow for your own safety.
• Ensure it is read carefully before first use and keep it handy for
future reference.
• These instructions should read and understood before anyone ope-
rates the product.
• Any modifications or maintenance that are not specified in the manual
should not be undertaken.
• The manufacturer is not liable for any injury or damage due to non-
compliance with the instruction manual.
• In case of problems or uncertainties, please consult a qualified person
that is able to handle the device correctly.
• This device should only be used for charging and / or start-up and
/ or power supply within the limits indicated on the device and in
the manual.
• The safety instructions must be followed.
• In case of improper or unsafe use, the manufacturer cannot be held
responsible.
• Cleaning and servicing tasks may not be carried out by children unless
they are supervised.
• Do not use for charging non-rechargeable batteries.
• Never charge a frozen or damaged battery.
• Do not cover the device.
• Do not place the device near a fire or subject it to heat or to longterm
temperatures exceeding 50°C.
• The automatic mode of operation and usage restrictions are explained
below in these operating instructions.
• Class III device.
• Under no circumstances should solvents or other aggressive cleaning
agents be used.
• Clean the device's surfaces with a soft, dry cloth.
• The device must absolutely be disconnected from the power supply
network before removing the battery.
OPERATION
Press the power button to check the state of charge of booster.
Indicator
1 LED
State Of Charge
20%
www.fulbat.com
2 LED
3 LED
4 LED
40%
60%
80%
The indicator will flash one by one during the period of charging.
Different number of LED indicators show state of charge of booster.
All indicators light up when the charging is completed.
Recharge before first use and after each use.
INTERNAL BATTERY CHARGING
Do not charge the booster unit immediately after starting
engines, but at least 30 minutes later.
CHARGING MOBILE PHONES
1.
Plug the USB cable to USB 1 or USB 2 output port.
2.
Select the appropriate adaptor for your mobile phone or tablet
and plug it in.
3.
Press the power button to charge,the indicator will be on when the
device is charging.
5 LED
100%
3
1.
Plug the charging cable to electronic de-
vices with USB output.
2.
Connect 5V/2A input port of booster to
charge.
1.
Plug the car adaptor into the socket of
cigarette lighter.
2.
Connect 5V/2A input port of booster to
the other end of car adaptor.
STARTING THE VEHICLE
1.
Connect the cable to the booster.
2. If the lights «Start» and «Error» flash
alternately in green and red, the product
is ready. If the red light only is ON, the
internal battery voltage of the booster
is too low. In this event, charge your de-
vice.
Publicidad
