Device Binding & Initialization
1. Please make sure you have a Matter-compatible app and a
Matter-compatible Thread Border Router.
2. Remove the insulating tab. The indicator should start breathing. Please
note: If the indicator is not breathing, press and hold the reset button
for 5 seconds until the LED indicator starts blinking and release it. The
device will enter the pairing mode.
3. Open the Matter-compatible app and scan the Matter QR setup code on
the manual or package, or enter the Matter numeric setup code printed
on the product to add the device to the app.
Product Specifications
Door and Window Sensor P2
Model: DW-S02E/DW-S02D
Bluetooth Operation Frequency: 2402-2480 MHz
Bluetooth Maximum Output Power ≤ 13 dBm
Thread Operation Frequency: 2405-2480 MHz
Thread Maximum Output Power ≤ 13 dBm
Dimensions: Main Unit: 77 × 22 × 22 mm (3.03 × 0.87 × 0.87 in.)
Accessory Unit: 36 × 11.5 × 7.3 mm (1.42 × 0.45 × 0.29 in.)
Operating Temperature: -10°C ~ 50°C (14°F ~ 122°F)
Operating Humidity: 0 ~ 95% RH, no condensation
Battery: CR123A
Wireless Protocols: Thread, BLE
02