Bioventus EXOGEN Guia Del Usuario página 33

Recommended separation distances between portable and mobile
RF communications equipment and EXOGEN
EXOGEN is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of EXOGEN can help prevent electromagnetic
interference by maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and EXOGEN as recommended below, according to the maximum
output power of the communications equipment.
Rated maximum output power of
transmitter – watts (W)
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m) can be estimated using the equation applicable to the
frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects and people.
Test Report # 104126490ATL-065, 2020-10-26. Testing performed by: Intertek Testing Services NA, Inc., 1950 Evergreen Blvd, Suite 100, Duluth, GA 30096.
EXOGEN Enclosure Port Immunity to RF wireless communications equipment
Test frequency Band
(MHz) (MHz)
385 380 – 390
450 430 – 470
710
745 704 – 787
780
810
870 800 – 960
930
1 720
1 845 1 700 – 1 990
1 970
2 450 2 400 – 2 570
5 240
5 500 5 100 – 5 800
5 785
Separation distance according to frequency of transmitter – meter (m)
150 kHz to 80 MHz
d = 1.2 √P
0.12
0.38
1.2
3.79
12.00
Service Modulation
Pulse modulation
TETRA 400
GMRS 460, FRS 460 ± 5 kHz deviation
1 kHz sine
Pulse modulation
LTE Band 13, 17
GSM 800/900, TETRA 800,
Pulse modulation
iDEN 820, CDMA 850, LTE
Band 5
GSM 1800; CDMA 1900;
Pulse modulation
GSM 1900; DECT; LTE Band
1, 3, 4, 25; UMTS
Bluetooth, WLAN, 802.11
Pulse modulation
b/g/n,
RFID 2450, LTE Band 7
Pulse modulation
WLAN 802.11 a/n
80 MHz to 800 MHz
d = 1.2 √P
0.12
0.38
1.2
3.79
12.00
Maximum
Distance
power
(m)
(W)
1.8 0.3
18 Hz
FM
2 0.3
0.2 0.3
217 Hz
2 0.3
18 Hz
2 0.3
217 Hz
2 0.3
217 Hz
0.2 0.3
217 Hz
800 MHz to 2.5 GHz
d = 2.3√P
0.23
0.73
2.30
7.27
23.00
Immunity
Test Level
(V/m)
27
28
9
28
28
28
9
30