Probuilder 18102 Manual De Instrucciones página 29

1. Bluetooth On/off
Press and hold the "On/Off" switch for 3
seconds, the Bluetooth function is turned on.
The indicator light is blue (on for 1 second);
likewise, press and hold the "On/Off" switch
for 3 seconds to turn off the Bluetooth
function. The indicator light is red (on for 1
second).
2. Pair-able status and empty paired list
Press and hold the "On/Off" switch for 6
seconds while in the off state, or press and
hold the "Play" button for 3 seconds to
disconnect when connected. The earmuffs
is into pair-able state , and the Bluetooth
indicator flashes blue rapidly every 10
seconds.
When the earmuff is in pair-able state, it can
be found and paired by other devices such
as mobile phones. The device name of the
earmuff is: "J&Y01".
Successfully paired devices will be saved in
the list.
In the Bluetooth disconnected state, press
and hold the "Volume-" and "Volume+"
buttons for 5 seconds at the same time,
which will clear the paired list.
3. Disconnected State and Connected State
When the earmuff is not connected to
Bluetooth (the indicator flashes red and blue
rapidly), if there is a device in the pairing
list, the headset will actively connect to the
device when power on again. The indicator
light flashes blue every 10 seconds after the
headset is connected to the device or while
it is working.
4. Call function and Control
When the earmuff is connected to Bluetooth,
double-click the "Play" button to re-draw the
last dialed number; When the earmuffs is in
the outgoing call, click the "Play" button to
cancel the external pullout.
When the earmuff is ringing, click the "Play"
button to answer the call, and press and hold
the "Play" button to reject the call.
When the earmuff is in a call, click the "Play"
button to cancel the current call, double-click
the "Play" button to switch between "Use the
phone to talk" and "Talk with the headset",
and click the "Volume +/-" button to increase/
decrease the call volume;
5. Play Music and Control
When the earmuff is connected, click the
"Play" button to play music. During play
status, click the "Play" button to pause;
When the headset is playing music, click the
"Volume+"/ "Volume-"button to increase
/decrease the volume, long press the
"Volume+"/ "Volume-" button to play the
next song/ to play the previous one.
6. Bluetooth Under-voltage Prompt
Function and Automatic Shutdown
When the Bluetooth function is turned on,
and the battery power is low, the indicator
light flashes red every 10 seconds, and a
"beep" sound is sounded every 2 minutes.
After the battery is exhausted or the pairing
time exceeds 5 minutes, the Bluetooth will
automatically Shut down.
GB
29