Publicidad
Idiomas disponibles
Idiomas disponibles
TOOLS
1 Tooth Belt Thickness Gauge
2 Test Plate
3 Calibration Button
4 Calibration Button
5 Calibration Button
6 Calibration Button
7 Calibration Button
8 Calibration Button
9 Tension Tester
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
INTENDED USE
This tool kit is used to determine the timing belt thickness and provides, based on the tooth belt
thickness a simple, accurate and effective way to adjust the tooth belt tension for timing belts with a
width of up to 30 mm.
SAFETY INFORMATIONS
•
Keep children and other persons away from the working area.
•
Do not allow children to play with this product or its packaging.
•
Use the tool for the intended purpose only.
•
If you remove the ignition key before repairing, you can prevent the engine from being started
accidentally and resulting in engine damage and personal injuries.
•
This manual serves as a brief guide and does not replace a workshop manual. Always refer to
the vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc..
ENVIRONMENTAL PROTECTION
Recycle unwanted materials instead of disposing of them as waste. Packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the
environment. Contact your local solid waste authority for recycling information.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Measuring tool set for
adjusting the tooth belt tension
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 70956
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
