Publicidad
Idiomas disponibles
Idiomas disponibles
Provide ample ventilation. This gas appliance consumes air (oxygen). Do not use this appliance in an unventilated space to
avoid endangering your life. If still more gas appliances and/or occupants using gas are added to the space, additional ventilation must
Read these instructions carefully so as to familiarise yourself with the appliance before fitting the appliance to a gas cylinder.
1. Safety information
These instructions are for your safety and to help you avoid risk of injury and/or damage.
All warranties will become void if you do not follow these instructions.
•
This appliance complies with BS EN17476:2021 and SANS 1539:2017.
•
Gas appliances require ventilation for efficient performance and to ensure the safety of
users and other persons in close proximity, do not use the appliance in an unventilated
area. It is intended for outdoor use only.
•
Ensure that the appliance is used in a well-ventilated area.
•
WARNING: ACCESSIBLE PARTS MAY BE VERY HOT. KEEP YOUNG CHILDREN AWAY.
•
Read these instructions carefully before using the appliance.
•
FOR OUTDOOR USE ONLY!
Assembly and use
•
Do not use the appliance if it has damaged or worn seals.
•
Do not use an appliance that is leaking, damaged or which does not operate properly.
•
Handle the appliance with care, do not drop it.
•
Always operate the appliance on a firm level surface.
•
Ensure that the assembled product is stable and does not rock.
•
This appliance is not suitable for installation or connection to a reticulated gas supply.
•
This appliance must be kept away from flammable materials during use. Minimum safe distances are: Above the appliance 120cm. At the rear
and sides 60cm. (fig 1)
•
When using a pot, the minimum recommended pot size is 150mm and maximum recommended size is 300mm.
•
Do not use any cooking surface or pot that is larger than the recommended size. Our cooking surfaces have been specifically designed to
allow gas combustion to escape and the closure of this space could affect the performance of this appliance.
•
Do not modify this appliance, any modification may be dangerous. Do not use it for anything for which it has not been designed.
•
Do not move the appliance during use.
•
Never leave the appliance unattended when lit.
•
During use, parts of the appliance will become hot (particularly the burner). Avoid touching hot parts with bare hands. The use of gloves is
recommended.
•
Ensure the pot stand /cooking surfaces are correctly placed when using the appliance.
Gas Container
•
This appliance uses the CADAC 220g/227g butane cartridge with nozzle valve or any other locally approved 220/227g butane cartridge
with nozzle valve and complying with EN417.
•
IT COULD BE HAZARDOUS TO ATTEMPT TO FIT OTHER TYPES OF GAS CARTRIDGES.
•
Ensure that the gas container is fitted or changed in a well-ventilated location, preferably outdoors, away from any sources of ignition such
as naked flames, pilots, electric fires and away from other people.
•
Keep gas containers away from heat and flame. Do not place on a stove or any other hot surface.
•
Refillable containers are to be used only in the upright position so as to ensure proper fuel withdrawal. Failure to adhere to this may cause
liquid discharge from the gas container resulting in a dangerous operating conditions.
•
Do not try to remove the gas container whilst the appliance is in operation.
•
The gas container must be disconnected from the appliance after use or when in storage.
Light back
•
In the event of light back (where the flame burns back and ignites inside the burner or venturi housing), immediately turn off the gas supply
by closing the appliance valve. After the flame is extinguished, remove the cannister and check the condition of the seal; replace the seal if
in doubt. Re-light the appliance.
•
Should the flame persistently light back, return the product to your authorized repair agent.
Leaks
•
If there is a gas leak on your appliance (smell of gas), immediately turn off the gas supply by turning the control knob clockwise to the "OFF"
position and take it into a flame free location where the gas leak may be detected and stopped. If you wish to check for gas leaks on your
appliance, do it outside. Do not try to detect gas leaks using a flame; use soapy water.
How to check the appliance is connected to the gas supply in a sound fashion
•
It is important that all gas connections have been correctly connected to prevent any gas leaks.
•
The correct way is to smear the joint, i.e. where the gas container connects to the appliance, with soapy water. Turn the appliance control knob
slightly anti-clockwise to turn the gas on. If bubbles form, then there is a gas leak. Immediately turn the gas off and disconnect the gas supply
from the appliance. Check that all the connections are properly fitted. Check that the seal is in place and in good condition before connecting
the gas supply. Re-check with soapy water after refitting the gas supply.
•
If a gas leak persists, return the product to your local dealer for inspection/repair.
CAUTION
be provided.
IMPORTANT
Retain these instructions for future reference.
1 1
EN
Fig. 1
Publicidad
