HB-128185.2
PARTS DESCRIPTION
1.
Low speed button
2.
High speed button
3.
Power handle
4.
Blender shaft (removable)
5.
Chopper cover
6.
Chopper blade
7.
Whisk collar
8.
Wire whisk
9.
Holder for accessories
Caution:
1. Do not use the appliance to blend very hard and/or dry foods. Do not use it to crush ice.
2. Never blend hot oil or fat.
3. Never run the appliance without load more than 15 seconds, otherwise the lifespan of the appliance may be
shortened.
4. Blades are very sharp, handle with care. Ensure that the hand-held blender is unplugged from the power
outlet before assembling or removing attachments.
BEFORE FIRST USE
1. Carefully unpack the appliance and remove all packaging material.
2. Clean the shaft and blade of your appliance in warm soapy water. Rinse and dry thoroughly before
assembling back.
INSTRUCTION FOR USE
To use the blender
* Continuous operation time for each cycle should not exceed 30 seconds, and after two consecutive cycles,
the appliance needs to be cooled for at least 3 minutes.
1.
Fit the power handle inside the blender shaft, turn and lock.
2.
Put the plug into an appropriate power outlet. To avoid splashing, place the blade in the food before
switching on.
3.
Hold the container steady. Then press either speed button (use low speed for slower blending to reduce
splashing).
4.
To stop the appliance, release the speed button.
5.
Don't let liquid get above the join between the power handle and blender shaft.
6.
If your blender gets blocked, unplug before cleaning.
7.
After use, take out the plug from the power outlet.
Notes:
The appliance blends and mixes fast and easily. Use it to make sauces, soups, mayonnaise, purees, dietary
and baby food, mixed drinks or cocktails. You can operate the stick blender in any bowl, pan or other
containers.
For saucepan blending, take the pan off the heat and let it cool down, otherwise your hand blender could
overheat.
To avoid splashing, insert the stick blender into the vessel first, then start operation.
- 95 -
EN