OPERATING - HEAT THERAPY
AND HOT STONE MASSAGE
• Switch the power button up to turn on
the console and ambient light therapy
with blinking green lights. There are 2
heat settings. Switch the power button to
the middle for low heat, and switch the
power button to the top for high heat. The
temperature for low heat is about 48˚C,
while the temperature for high heat is
about 55˚C.
• Always start with low heat for first-time
use.
• Place the hot stones on the console
to heat up. Hot stone massage will be
ready in about 10 minutes. For higher
temperature, heat the hot stones for a
longer time.
• Always touch the stones first to feel the
temperature before holding it firmly on
hands, and applying on body.
• Place the hot stones either on nape,
back, waist, arms, shoulders, or legs of
your partner to enjoy heat therapy.
• To enjoy hot stone massage, apply a
small amount of ELEEELS Care Mas-
sage Oil on the skin of your partner
before rubbing hot stones on different
parts of the body.
• Pick up any of the hot stone(s) and rub
them on target areas of the body.
• Place the hot stones back on the con-
sole to re-heat or keep warm if neces-
sary.
• Switch the power button down to turn
off the console. Alternatively, the con-
sole will turn off automatically after a
90-minute session. Please also switch
the power button down as well.