Keba KeContact M20 Guía Rápida página 102

Mounting and installation instructions
3.3 Space requirement
Embedded PC
Fig. 3-3: Space requirement (dimensions in mm) for control cabinet installation
The specifications are minimum distances. If a USB stick is used in opera-
tion, more space may need to be taken into account.
3.4 Installation in the control cabinet
Information
● When positioning the KeContact M20, you must make sure that it does
● The SIM card may need to be installed before the mounting is done.
The KeContact M20 can be mounted on a top hat rail. The mounting pack-
age includes two brackets (one has a shorter depth) and a mounting clip.
Information
The screw holes in the KeContact M20 for the mounting package are sym-
metrical. The mounting package can be mounted on any side of the Ke-
Contact M20.
Required materials and tools:
●
●
Proceed as follows to mount the KeContact M20 on the top hat rail:
102
not block access to existing control cabinet components.
Otherwise, installation is no longer possible.
3x M3 screws, 5 mm length (included in the scope of delivery)
Phillips screwdriver PH1 (not included in the scope of delivery)
M20
Brief instructions V1.01
© KEBA 2022