First Run Setup; Set The Language - Peimar MIRUS LINE Manual De Usuario

The buttons on the inverter allow you to navigate the menu for inquiry
information on operation and operating parameters. These two buttons can be
used repeatedly.

6.2 First run setup

6.2.1 Set the language

In order to power on the inverter, turn on DC switch. When inverter starts for the
first time, please configure the language. The inverter LCD displays as below:
Press "ENT" button and select language scrolling the cursor with "▼" or "▲"
buttons. Press again "ENT" button to confirm. Then select Grid compliance:
inverter LCD displays as below:
Press "ENT": the display shows country options with respective Grid compliance.
Pressing "▼" or "▲" buttons scrolling the cursor ">" until select the correct Grid
compliance, then press "ENT" button to confirm the selection.
Then set date and time.
Press for less than
1 second
Press for more than
1 second
Press for less than
1 second
Press for more than
1 second
Please set the
language first
Please set the
country
Move down the cursor to enter into the
sub-menu, or reduce the setting value.
Return to the previous menu or cancel the
present order.
Move up the cursor to enter into the superior
menu, or increase the setting value.
Enter into the sub-menu, or confirm order.
85
EN