Publicidad
Idiomas disponibles
Idiomas disponibles
Instruction Manual
- Release the clip at the bottom and remove the HEPA filter from
the vacuum cleaner's lid.
- The grating and float should not be removed.
- Pull out and remove the Nylon filter.
- After removing the filter and bag, reinstall the top lid where
indicated and lock the lateral clips.
NOTE: when the filters need to be cleaned, the same
procedure should be followed.
6. Emptying the tank
- When the tank is full, release the lateral clips, remove the nylon
filter, tilt the vacuum cleaner so that it is horizontal and empty
the tank.
- Make sure the tank is empty, position the vacuum cleaner in a
vertical position and reinstall the top cover.
7. Solid suction mode
- Make sure the filters and bag are installed properly and connect
the accessories according to the operation to be performed.
IMPORTANT: always use all the supplied filters for suctioning
solids.
44981 - 1400 W Wet and Dry Vacuum Cleaner
21
Publicidad
