Publicidad
Idiomas disponibles
Idiomas disponibles
ENG
9
Dismantling and disposal
The unit must be dismantled and disposed of in an environmentally friendly way at the end of its useful life.
9.1
Safety information
All work may only be performed by persons with certified qualifications under consideration of:
•
the minimum qualification
•
this manual
•
the valid local regulations and laws
•
company-internal work, operation and safety regulations
Use the necessary personal protective equipment for the respective activity for all work.
DANGER
Danger of fatal injury due to electric shock!
Parts may be under voltage when the unit is opened and can cause an electric shock if touched.
Observe the following points when working on the open unit:
•
Work on the electrical system may only be carried out by authorized electricians.
•
Before commencing work on the electrical system, switch off the power supply, check that no voltage is applied and
secure against being switched back on.
•
Cordon off the working area and post a warning sign.
•
The electrical connection must be made according to nationally valid regulations.
CAUTION
Risk of cutting and injury!
Risk of cutting and injury due to production-related, sharp sheet metal edges on the unit.
•
Use personal protective equipment (cut-proof gloves).
•
Handle with care.
CAUTION
Risk of injury due to improper working!
Risk of injury due to improper working on the refrigeration unit.
•
The refrigeration unit may only be dismantled by specialized refrigeration companies.
Operating Manual | Attachment and Installation Cooling Units | Standard Controller (SC) – 230 V | 086100119
Units marked by the symbol opposite may not be disposed of with unsorted domestic waste.
They must be taken to a separate electrical and electronic waste collection depot.
For further information about disposal, scan the QR code or call
www.pfannenberg.com/disposal.
60/66
Publicidad
