Publicidad
Idiomas disponibles
Idiomas disponibles
•
Press the
on/off button (K) to switch the product on/off.
•
Refer to the "Operation (Control Panel)" chapter to make the settings.
Emptying the water tank
•
When the water tank (N) is full the product stops its operation.
The
full indicator (B) lights up, and the display (D) shows an
error code.
•
Hold the water tank (N) on its sides and carefully pull it out.
•
Drain the water into a sink.
•
Place the water tank (N) properly into the housing.
•
The product restarts automatically.
Using a drain hose (continuous drainage)
When using a drain hose, the collected water is drained out of the drain
hose outlet (P). No water is collected in the water tank (N).
NOTICE
The drain hose outlet (P) has no pump. The connected
hose must be sloping downwards.
Open the drain hose outlet (P) by turning it in a counter-clockwise
•
direction.
EN
11
Publicidad
