Publicidad
Idiomas disponibles
Idiomas disponibles
V. C O M F O R T A D J U S T M E N T S
SEAT HEIGHT ADJUSTMENT
The seat can be repositioned to diff erent heights. See fi gure 26.
1. Remove the seat and battery pack from your Travel Scooter.
2. Use the attached ring to pull and remove the detent pin from the
lower seat post.
3. Raise or lower the upper seat post to the desired seat height.
4. While holding the upper seat post at that height, align the
adjustment holes of the upper and lower seat posts.
5. Fully insert the detent pin.
6. Replace the battery pack and seat.
NOTE: If equipped, the under-seat storage feature must be
removed to obtain a seat height of 16.5 inches (41.9 cm) or less.
Refer to "Under-seat Storage" for more information.
NOTE: If your Travel Scooter is equipped with underseat storage,
the seat lever is on the front, center of the the seat.
28
IDENTIFICATION KEY
1. Upper Seat Post
2. Lower Seat Post
3. Detent Pin
Figure 26. Seat Height Adjustment
Travel Scooter Series
Publicidad
