Makita XUC04 Manual De Instrucciones página 15

4. Place the holding frames on the base unit, and
then temporarily tighten 2 bolts at the rear of the
machine. Tighten the rest of 4 bolts securely, and then
tighten 2 bolts at the rear of the machine securely.
1
Fig.25
► 1. Bolt (front) 2. Bolt (rear)
5. Attach the cord cover.
1
Fig.26
► 1. Cord cover
6.
people as shown in the figure, and mount the flat bucket
to the holding frames.
2
Fig.27
Removing the flat bucket
To remove the flat bucket, perform the installation pro-
cedure in reverse.
FUNCTIONAL
DESCRIPTION
Installing or removing battery
cartridge
lock the brake lever before installing or removing
of the battery cartridge.
fully until the red indicator cannot be seen. If not,
it may accidentally fall out of the machine, causing
injury to you or someone around you.
forcibly. If the cartridge does not slide in easily, it is
not being inserted correctly.
battery cartridge. When the high-temperature bat-
tery cartridge is used, the machine stops automati-
cally before a short beep sound is emitted, and may
cause an injury.
gers when opening or closing the battery cover.
15 ENGLISH
Hold the long sides of the flat bucket with two
CAUTION:
Always switch off the machine and
CAUTION:
Always install the battery cartridge
CAUTION:
Do not install the battery cartridge
CAUTION:
Do not use the high-temperature
CAUTION:
Be careful not to pinch your fin-