Outside Station; Installation - Extel LESLI Instrucciones De Uso

b. Outside station
1. IR Led: night vision (light invisible to the naked eye) with dusk sensor.
2. Adjustable C-MOS camera lens
3. Speaker
4. Call button
5. Name holder and light indicator:
cally in the dark.
6. Microphone
8. Terminal block to connect the wires
9. Access to adjust the camera lens
1. Aerial
2. SMA aerial connector
4. Battery compartment
5. Terminal block to connect an automated portal
6. Terminal block to connect the electric door opener or electric lock
7. Power supply terminal block (12 or 24 V AC/DC)
8. Pairing and reset buttons

4. INSTALLATION

Important :
tor.
Caution: Do not use rechargeable batteries.
1.
(5-6-7 fig 6)
2. Place a silicone seal (4) between the shield and the wall to avoid water running inside. (do not use acetic acid
based silicone (vinegar smell).
3.
Tip: we recommend passing the wires (for the outside station and the electric door opener) through a protective
should also be placed sufficiently high up (about 1.60m from the ground) and in a vertical position to achieve the
best performances.
NB:
(higher and further away from any obstacles).
4.
GB3
CFI EXTEL LESLI - 02/2015
-
-
-
-