Installing The Monitor; User Guide - Extel LESLI Instrucciones De Uso

Caution: do not touch the electronic circuit directly (see note in the safety instruction section)
5.
right (fig. 6).
6.
for the connection to the door opener (you should therefore drill the pillar or wall accordingly). These 2 wires
are then connected to the electric lock or door opener and on the "LOCK" terminal block in the electronic
Note: Do not install any aerial other than the original one
Caution:
... or to the mains
-
b. Installing the monitor ...on a wall
1.
monitor at least at 1.6 metres from the ground.
2. Insert 1 anchor in each hole and then 1 screw in each anchor.
3. Connect the mains adapter to the DC IN socket.
4.
in one of the 2 possible positions.
5.
6. Attach the screen base to the wall and connect the power supply adapter to the power outlet. The monitor is
now ready for use.
... or on a desktop
1. Lock the screen in position by inserting the metal loop onto the 2 clips in the selected position.
2.
3. Connect the mains adapter to the mains. The monitor is now ready for use.

5. USER GUIDE

Caution: If you test your videophone before installing it (short distance test) keep a minimum distance between
the monitor and the outside station of about 3 m (risk of saturation) Also place the monitor on a level surface.
CFI EXTEL LESLI - 02/2015
GB4