Publicidad
Idiomas disponibles
Idiomas disponibles
TELESCOPIC TUBE
1.
Put the handle of the hose into the telescopic tube.
2.
Set the telescopic tube to the desired length. To do this, push the slide button forward and pull out
the bottom part of the tube to make it longer. Release the slide button and let the tube snap into
place.
3.
Attach the floor nozzle to the telescopic tube by firmly sliding the tube into the nozzle.
1
ACCESSORIES
1.
Crevice nozzle: for hard to reach areas like radiators, crevices, corners, in
between pillows,...
2.
Dust brush: for furniture, shelves,...
3.
Furniture nozzle: for easy, quick and thorough cleaning of upholstered
furniture
USE
1.
Unwind the cord to a substantial length and plug in the vacuum cleaner. The yellow label on the cord
indicates the maximum length of the cord, that should not be exceeded.
2.
To turn the vacuum cleaner on and off, press the foot pedal with the
3.
The suction can be controlled using the valve on the handle of the hose. The appliance has a strong
suction force. This could cause the end of the floor nozzle to attach to the floor. If you want to
reduce the suction force, you can slide open the valve on the handle of the hose.
·
Carpets: ensure that the switch on the floor nozzle is set to
·
Hard floors: ensure that the switch on the floor nozzle is set to
4.
When you have finished vacuuming, unplug the vacuum cleaner and automatically rewind the cord
by pressing the foot pedal with the
forth while rewinding the cord, by guiding the cord with your hand. This to prevent possible damage.
CLEANING AND MAINTENANCE
EMPTYING AND CLEANING THE DUST RESERVOIR
Empty the dust reservoir regularly. Make sure that the
dust in the dust reservoir does not exceed the maximum
level.
1.
Take the handle of the vacuum cleaner and press
the button. Carefully remove the dust reservoir
from the vacuum cleaner.
2.
Hold the dust reservoir above the dustbin. Press the
button to empty the dust reservoir. The bottom will
click open and the dust will fall out.
www.domo-elektro.be
2
symbol. Make sure that the plug does not whip back and
3
1
3
symbol.
.
.
1
DO1084S
2
2
27
Publicidad
