Urmet 1092/418H Manual Del Usuario página 14

2.2 OSD CCTV MENU CONTROLS
Select the menu using the MENU [4] button in order to access the Menus and Submenus and their functions
Use of the buttons
Selection of the video input

In order to show the possible video inputs, press the [1] button

In order to scroll the options, use [2-3] buttons

In order to confirm the selection press the [4] button.
Selection of the Menus

In order to show the main Menu, press the [4] button.

In order to select the Menus of the horizontal bar, press the [2-3] buttons.

In order to select each single Menu, press the [4] button.

In order to change a value (once the option is selected), press the [2-3] buttons.

In order to confirm the selection, press the [4] button.

In order to exit from Menus and Submenus, press the [1] button.
Volume adjustment

In order to vary the volume without entering the OSD Menu, use [2-3] buttons.

2.2.1 PICTURE
Selecting the icon, the following screen will appear (depending the signal type):
BNC/HDMI
CONTRAST
It allows to change contrast between white and black areas of the image. A clear resolution of good white, black and grey
gradation is achieved by a proper setting of contrast. Press "2" and "3" buttons to change the values of this parameter.
BRIGHTNESS
It allows to change image brightness, according to ambient light. Press "2" and "3" buttons to change the values of this
parameter.
HUE
Only used in NTSC system.
DS1092-209A
VGA
14