YABER YA30 Manual Del Usuario página 7

support@ibuture.com
support@yaberauto.com
Dual USB Outputs and DC Output
This portable jump starter is also equipped with two smart USB outputs
and a DC output that provide the fastest charging speed (Output 1: 5V
2.1A, Output 2: 5V 2.4A/9V 2A/12V 2A, DC Output: 12V-16.8V 3A) for your
portable electronic devices, such as phones, tablets, bluetooth earphones,
etc.
Start your Car
1.Insert the plug of the smart clip completely
into the jump starter. (The symbol" "
flashes)
2.Correctly clip the red and black clamps to
the electrodes of the car battery (red to
positive and black to negative)(The Digital
LCD Screen shows the YA30 Jump Starter's
current voltage.)
3.Start the vehicle.
4.When the vehicle is started, remove the
jumper cable from the vehicle battery
immediately.
EN 05