Operation; Cleaning - Profi Cook PC-HM 1026 Instrucciones De Servicio

Please choose the accessories and speed setting according to the table below:
Product / method of
preparation
Heavy dough (e.g. yeast dough)
Cake batter or light crêpes
mixture
Sponge mixture, waffle mixture,
cream
Liquids,
e.g. dressings, milk shake
Fruit
Onions, herbs

Operation

1. Place the container with the ingredients on a
flat surface.
2. Make sure the switch (1) is at the "0" posi-
tion and the appliance disconnected from the
mains.
3. Attach all accessories.
4. Connect the appliance to a properly installed
earthed socket.
5. Immerse the fitted attachments into the
container with the ingredients. Immerse the
blender stick up to ¾ of its length!
6. When using the dough hooks / beaters, press
the switch (1) to turn on the appliance. Select a
speed setting.
When using the blender stick, set the switch
(1) to the blender stick symbol and press the
TURBO button to turn on the appliance.
CAUTION: Short-term operation
• In speed setting modes 1 to 5, the maximum
operating time of 5 minutes per operating
cycle must not be exceeded.
• In TURBO mode, the maximum operating
time per operating cycle will be reduced to
1 minute.
• Wait at least 1 minute between two operating
cycles.
44
Max. quantity Accessories
500 g Dough hooks
750 g Beaters
750 g Beaters
Beaters
1.5 Liter
Blender stick
Blender stick
Blender stick
Ending operation
1. Set the switch to "0" position and wait until the
motor has come to a complete stop.
2. Disconnect the plug from the outlet.
3. Detach the accessories from the housing and
clean immediately.
Preliminary cleaning after use
In order to pre-clean the appliance, fill a container
with hot water and use the blender stick as de-
scribed under "Operation".
Overall cleaning
WARNING:
• Always remove the power cord before clean-
ing.
• Do not immerse the appliance in water for
cleaning. It could result in an electric shock or
fire.
CAUTION:
• Do not use a wire brush or other abrasive
utensils for cleaning.
• Do not use aggressive or abrasive cleaning
agents.
Speed setting / Max. operating
Button
1 – 4 5 min.
2 – 5 5 min.
(With TURBO) (1 min.)
2 – 5 5 min.
(With TURBO) (1 min.)
2 – 5 5 min.
(With TURBO) (1 min.)
TURBO 1 min.
TURBO 1 min.
TURBO 1 min.

Cleaning

time