Samsung NA36 5310F Serie Manual De Instalación página 22

Installation instructions
Step 10. Final installation checklist
WARNING
• To ensure a safe and proper installation, the following checklist should be
completed by the installer to ensure that no part of the installation has been
overlooked.
• Proper installation is the responsibility of the homeowner. The importance of
proper installation of your Samsung cooktop cannot be overemphasized.
You have just completed installing your cooktop. Make sure all control knobs are
in the off position. The following is a checklist to confirm your cooktop is safely
installed and ready for operation.
– Gas line has been properly connected to the cooktop. The gas has been turned
on.
All connections have been checked for leaks.
– The cooktop is plugged into the properly grounded electrical receptacle.
– The cooktop burners and grates have been properly assembled.
– All burners have been tested for proper operation.
22 English
Install_NA30R5310FG_AA_DG68-01133A-00_EN.indd 22
LP (Propane) conversion instruction
WARNING
• This conversion must be performed by a qualified installer or gas supplier in
accordance with the manufacturer's instructions and all codes and requirements
of the authority having jurisdiction. Failure to follow ALL in structions could
result in serious injury or property damage. The qualified agency performing this
work assumes responsibility for the conversion.
• Know the location of the gas shut-off valve and how to shut it off if necessary.
• Unplug or disconnect power before servicing.
• Do not operate the cooktop burners when using LP gas before converting the
pressure regulator and burner orifices for LP gas use. Failure to do so could
cause high flames and toxic fumes which can result in serious injury.
• Do not mix up or substitute LP gas burner orifices during conversion process.
Improper orifice placement will effect burner and cooking performance and could
result in personal injury and/or product damage.
All Samsung gas cooktops are manufactured and shipped to be used with natural
gas. The cooktop are also shipped with LP Conversion Kits, so the cooktop can
be converted to be used with LP gas. The kits consist of a set of properly-sized
burner orifices to be used in the cooktop burners. These orifices will be positioned
in a sheet of cardboard and placed in a plastic bag. The bag is placed with a user
manual. The orifice in the pressure regulator is a dual-purpose orifice, one side for
natural gas and the other for LP gas.
2019-04-12 12:13:37