TECshow QUADBAR 12 PIX Manual De Usuario página 3

2. DIMENSIONS
In milimiters.
This fixture is not only easy to operate, but also has
affluent effect procedures. It has six work modes.
• Manual selection mode
• Auto running mode
• DMX mode
• Sound active
• Slave mode
• Static mode
2. PRODUCT OPERATING INSTRUCTIONS
Manual selection mode
a. Press the mode button to enter this mode
menu "Pr.01".
b. Press the up or down button to enter effect
program "Pr.01 - Pr.16". When the LED displays
Pr.01 please press the setup button to enter the
static color edit environment, and then select
15 static colors by the up or down button (7-9b,
2-rb, 3-r4, 4-r9, 5-cu, 6-ru, 7-9u, 8-bu, 9-49, 10
uu, 11-r, 12-9, 13-6- 14-a, 15on-off). Press the
setup button to set strobe "F5.00 ". Press the up
or downbutton to adjust strobe speed F5.00 ~
F5.99.
c. When the LED displays Pr-02 - Pr-16, Press the
setup button, it will display "5P.92". This time,
you can set running speed 5P.01~5P.FL (100) by
the up or down button. Press the setup button
1074
again, it will display "F5.00". And adjust strobe
speed F5.00 ~ F5.99 by the up or down button.
Auto running mode
a. Press the mode button to enter the auto run-
ning menu "AUTO ". The light will automatical-
ly operate 15 built-in programs Pr.02 ~ Pr.16.
b. Press the setup button to enter setting auto
running program frequency menu " n.002 ".
And then set program frequency value n001 -
n100.
c. Press the setup button to enter setting auto
running program speed menu "5P.92".
d. Press the up or down button to set speed
value 5P.01 - 5P.FL (100).
e. Press the setup button to enter the auto run-
ning program strobe menu "F5.00".
71
| Tecshow Quadbar 12 Pix
English version
P. 3