Publicidad
Idiomas disponibles
Idiomas disponibles
C
5. Repeat the same procedure to attach the Right Side Frame (C) to the Desk Top (A) and Bottom Back
Stretcher (D) at the opposite end.
6. Ask for assistance to turn the unit upright.
7. The drawers come with the knobs pre-assembled to the inside of the drawers. To remove the knob,
unscrew the bolt located on the front of each drawer. Re-install the knob to the front of each drawer
with the same bolt.
8. If you need to remove the drawer with ball bearing slides from the unit, please pull the drawer all the
way out, then simultaneously push the plastic release lever of the ball bearing slide up on one side and
down on the other side, and pull the drawer completely out.
NOTE: To place the drawer back, simply push the ball bearing cart all the way to the end of the slides
(in both sides) and align the slide runners on the drawer with the slide tracks on the unit and push it
carefully inside until it stops. If the drawer does not go in smoothly, please take it out and repeat the
step.
Assembly Instructions
D
C
5
A
Publicidad
