Elite VC2525P Manual De Usuario página 13

Diagram of the machine's disassembly and assembly
Take away the machine
head.
Pull out the clips to take
away the machine head.
Instruction after use
1. Turn off the switch
"o" for turn off
"-"for turn on
6.Take off the filter, wash and
dry it for next use.
Take off the HEPA board.
Twists off the knob anticloc-
kwise, then take off the
HEPA filter.
2. Pull out the plug and put the
wire in order.
5.Clean the tank and dry
with a soft cloth.
Clean the filter.
Clean the filter and dry in a
ventilated place.
3.Take off the hose and floor
2
www.ELITETOOLS.co
Install the HEPA
and machine head.
Put the filter in place and
twist the HEPA board
anticlockwise to lock.
brush, clean the rest dust.
4.Take off the head as the
picture.
Keep Working