Phonic UM30 Manual Del Usuario página 9

2. Receiver Module (UM-R10 and UM-R11�
This receives the RF signal sent from the
bodypack transmitter. The UM-R10 has four
LED indicators: two RF, one AF and a Power
indicator. The UM-R11 simply has 1 for Power.
I. Power indicator
This LED will illuminate when the receiver
module receives power.
II. RF LED Indicators
When one of these LEDs is illuminates, it
indicates that the bodypack's signal is being
received successfully. The RF LED that lights
up is determined by whichever antenna is
receiving a clearer signal from the transmitter.
If for some reason this LED does not turn on,
check your batteries in the transmitter and
configuration and try again.
III. AF LED Indicator AF LED Indicator F LED Indicator
When this LED is illuminated, it indicates
that there is an audio signal present. If this
LED is not activated, check the head of the
microphone is correctly attached, and double
check your set up.
IV. Channel Selector Channel Selector
This indicates the channel number that is
actually in use by the receiver. This number
should be identical to the channel selected on
the transmitter.
UM-R11
UM-R10
UM 30/31/40/41/50/51
V. Volume Control Volume Control Control Control
This dial determines the audio level of the
signal received by the UM-R10 receiver.
3.Condenser Lavaliere Microphone (ML-10�
Lavaliere microphones are widely used in broad-
casting and also for personal presentations.
Its small size make them perfect for any pro-
fessional application, also you will save space
and efforts. This is a condenser microphone, it
means that needs voltage to proper function,
this will be feed from the bodypack batteries,
and this also gives you a great signal gain.
4.Condenser Headset Microphone (MH-20�
The headset microphone is a very comfortably
fitting microphone that sits perfectly on your
head. Brings you freedom of movement, this
way you can do all your activities while you are
speaking at the mic.
9