ESX SIGNUM Serie Manual De Uso página 9

Please read the user's manual carefully before the installation and the first operation
of the amplifier.
SPECIFICATIONS
Output Power RMS
Output Power Max
Loudspeaker impedance
Frequency Response
Total Harmonic Distortion
Signal-to-Noise Ratio
Input Sensitivity
Input Impedance
Lowpass Filter
Subsonic Filter
Bass Boost
Phase Shift
Master/Slave Link
High Level Inputs
Auto Turn On
Operating Voltage
Fuse Rating
Dimensions (B x H x L)
All Specifications are subject to change
SXE1200.1D
1 x 300 W @ 4 Ohms
1 x 450 W @ 2 Ohms
1 x 600 W @ 1 Ohm
1 x 600 W @ 4 Ohms
1 x 900 W @ 2 Ohms
1 x 1200 W @ 1 Ohm
1 – 8 Ohms
10 – 160 Hz (-3 dB)
< 0,5 % (80 Hz)
> 105 dB
0,2 – 5 V
10 kOhms
40 – 150 Hz @ 12 dB/Octave
10 – 35 Hz @ 12 dB/Octave
0 – 12 dB @ 40 Hz
0 – 180°
Via Master Out
Via enclosed Cable Jack
Only via High Level Inputs
+12 V (9 – 15 V), negative ground
3 x 25 A
220 x 53 x 268 mm
SXE2000.1D
1 x 400 W @ 4 Ohms
1 x 700 W @ 2 Ohms
1 x 1000 W @ 1 Ohm
1 x 800 W @ 4 Ohms
1 x 1400 W @ 2 Ohms
1 x 2000 W @ 1 Ohm
1 – 8 Ohms
10 – 160 Hz (-3 dB)
< 0,5 % (80 Hz)
> 105 dB
0,2 – 5 V
10 kOhms
40 – 150 Hz @ 12 dB/Octave
10 – 35 Hz @ 12 dB/Octave
0 – 12 dB @ 40 Hz
0 – 180°
Via Master Out
Via enclosed Cable Jack
Only via High Level Inputs
+12 V (9 – 15 V), negative ground
3 x 30 A
220 x 53 x 328 mm
9