Publicidad
Idiomas disponibles
Idiomas disponibles
REFILLING E-LIQUID
When you have about 25% of e-liquid remaining or you experience a slightly burnt taste, you will need to refill your tank with
e-liquid.
1. Always remove the battery from the tank before refilling with e-liquid. When unscrewing your tank from your battery, always
turn your device sideways, hold th e steel cap located on the tank and unscrew the battery counterclockwise.
2. Turn the tank upside-down and unscrew the steel cap.
3. Point and pour e-liquid into the sides of the tank. Fill to the center tube of the tank.
(DO NOT OVER-FILL OR POUR E-LIQUID INSIDE OF THE CENTER TUBE)
4. Screw the steel cap back onto the tank.
*VaporFi Edge tanks contain O-rings that maintain an air-tight seal in order to prevent leaking from the tank. Avoid over tightening of the tank's steel base or Atomizer head as
this could damage the O-rings and cause leaking. Therefore, when screwing on your Atomizer head or steel base, only tighten until you feel resistance.
Publicidad
