Vaporfi EDGE Manual Del Usuario página 8

4. Once the old Atomizer has been removed, screw in a new Atomizer head by turning it clockwise into the steel base until you feel
resistance. Make sure not to over tighten the Atomizer head as this may damage the rubber O-rings and cause leakage.
5. Screw the steel base back onto your tank by turning it clockwise. Make sure not to over tighten.
6. Prime your Atomizer by taking a few "dry puffs" without pressing the power button in order to saturate the wick.
AIRFLOW CONTROL TECHNOLOGY
Turn the airflow control clockwise to increase airflow and counterclockwise to decrease airflow.