Publicidad
Idiomas disponibles
Idiomas disponibles
GETTING STARTED
Note: When assembling parts, always screw until you feel resistance and do not over
tighten parts.
1. Locate the battery cap, which contains a hole in the center.
2. Unscrew and remove the battery cap by turning it counterclockwise.
3. Screw the threaded end of the mouthpiece onto the battery cap by fully inserting the
mouthpiece (mouthpiece tip first) into the center hole of the battery cap. Then, turn the
mouthpiece counterclockwise to secure it to the battery cap.
4. Next, unpack your tanks and remove the silver cap by turning the cap counter clockwise.
5. Use your VaporFi e-liquid bottle to fill your tanks with e-liquid by pointing the tip of the
bottle to the side of the tank making sure to not allow any liquid to flow down the center
tube. Fill to about 90%, this ensures that no liquid will go down the center tube. (Both
tanks can have the same flavor or each tank can have a different flavor).
03
Publicidad
