Vaporfi VICE Manual Del Usuario página 8

4. Once the old atomizer has been removed, screw in a new atomizer head by turning it
clockwise into the steel base until you feel resistance. Make sure not to over tighten the
atomizer head as this may damage the rubber O-rings and cause leakage.
5. Screw the steel base back onto your tank by turning it clockwise. Make sure not to over
tighten.
6. Prime your atomizer by taking a few "dry puffs" without pressing the power button in
order to saturate the wick.
AIRFLOW CONTROL TECHNOLOGY
Turn the airflow Control clockwise to increase airflow and counterclockwise to decrease
airflow.