Publicidad
EN
AC/DC Voltage Measurements
Warnings
Observe all safety precautions when working on live voltages.
1. Touch the test probes across the circuit being measured.
2.
3. The LEDs will indicate the voltage.
4. For AC voltage, the "+" and "-" LEDs will illuminate.
5. For DC voltage, the "+" LED will illuminate if the instrument test probe is
touching the positive side of the circuit. The "-" LED will illuminate if the
instrument test probe is touching the negative side of the circuit.
18_s1_s15_5059340161952_OPP_A6_IM_Multi-V04.indd 22
EN Use
22
30-06-2021 14:11:25
Publicidad
