BWT PK MAX Manual De Usuario página 9

the float to the handle of the swivel head. Press on the side clip to eject the stem from
the float.
Release the retrieval cord from the stem to a length equivalent to the distance between
the handle of the robot and the water level. NOTE: Excess length may kink the rope and
affect performance as a result.
Once the desired length has been achieved, maintain it by holding the rope onto the stem
and reattach it to the float by pressing on the side clip as shown.
2. With the robot switched off, submerge it in the pool and gently shake it a few times to
facilitate discharge of air. Excess air trapped in the body could result in erratic
behavior of the swivel head (i.e. spinning repeatedly in the pool for a few minutes).
8/195