Publicidad
Idiomas disponibles
Idiomas disponibles
Depth Stake
The depth stake acts as a brake for the tiller and controls the
depth and speed at which the machine will operate, Figure 6-2.
Remove the clevis and cotter pins, raise or lower the depth stake,
then reattach pins to secure.
Cotter Pin
Off-Season Storage
If the tiller will not be used for a period longer than 30 days, the
following steps should be taken to prepare the tiller for storage.
•
Clean the exterior of engine and the entire tiller
thoroughly. Lubricate the tiller as described in the
Lubrication instructions.
•
We do not recommend the use of pressure washers to
clean your tiller. They may cause damage to spindles,
pulleys, bearings, or the engine. The use of pressure
washers will result in shortened life and reduce
serviceability.
•
Refer to the engine manual for correct engine storage
instructions.
•
Wipe tines with oiled rag to prevent rust.
•
Store tiller in a clean, dry area. Do not store next to
corrosive materials, such as fertilizer.
•
When storing any type of power equipment in an
unventilated or metal storage shed, care should be taken
to rustproof the equipment. Using a light oil or silicone,
coat the equipment and especially any springs, bearings,
and cables.
14
s
6— M
ectiOn
aintenance
Clevis Pin
Figure 6-2
& a
djustMents
Publicidad
