Publicidad
Idiomas disponibles
Idiomas disponibles
6. As shown in the figure, put the water storage box into the pressure cooker.
7. After switching the pressure cooker on it will be hear a short sound, and the display
will show "00:00" in red. At this moment, the electric pressure cooker will be in standby
state.
FUNCTIONS DESCRIPTION
According to the foods, choose one function on the control panel.
For more desired options, press "MENU".
After selecting the desired menu, the timer indicator and the menu indicator will be
flashing. At this moment, you can press "+" or "-" to adjust the cooking time, or you can
press the "Favor" button to select the suggested cooking time; also you can adjust the
pressure level with the "pressure" button, and set high or low pressure.
For more details about cooking times please check the cooking time chart.
Mantener caliente/cancelar (cancel / keep warm):
a. You can cancel a menu function or cancel the process of cooking any time by pressing
the "Cancelar (cancel)" function. In the event of a mistake, press the cancel button and
program the menu again.
b. Press the "Mantener caliente (keep warm)" function after you choose the menu. The
cooker will stay warm for 24 hours automatically once cooking is finished.
Temp (Pre-set ):
All of the functions require to set the "Temp (pre-set)" time. Press the button to sched-
ule your pot in advance up to a maximum of 24 hours. You can long press the button
to increase the preset time quickly. The cooking process will start after the preset time.
(+) (-) Buttons:
Press the "+" or "-" button to increase or reduce the time and pressure after the menu
has been chosen. The minutes will increase or decrease 1 minute every time you press
the button and the time display will blink for a few seconds until the menu is confirmed,
otherwise the menu will be canceled.
Cocinando (start cooking):
Once we have chosen and set the desired menu, press the "cocinando (cooking)" button
to start cooking.
Publicidad
