Publicidad
Idiomas disponibles
Idiomas disponibles
PARTS LIST
26" x 18" Toolbox
SE250AL
REF DESCRIPTION
Gas Shock
1
2
Rod
3
Weatherstripping Kit
1 x 26.5" (674 mm) Weatherstripping
2 x 25.9" (658 mm) Weatherstripping
23" x 14" Toolbox
SM200B
REF DESCRIPTION
1
Rod
2
Gas Shock
3
Weatherstripping Kit
1 x 23" (585 mm) Weatherstripping
2 x 19.4" (492 mm) Weatherstripping
Refer to common parts list for general parts not shown.
8
3
2
3
1
PART NUMBER QTY
231346
1
231322
2
231073–231058
1
3
2
1
3
PART NUMBER QTY
231321
2
231399
1
231058–231049
1
SIDE HANDLE INSTALLATION
The side handles need to be installed. Attach each side handle using the four screws
provided. Does not apply to aluminum boxes - handles are pre-installed.
MAINTENANCE
Periodically clean the unit surfaces with mild detergent and water.
Auto wax can be used on painted steel (not on aluminum) toolboxes to preserve the unit's
luster finish and protect against scratches. Apply the wax as you would to a car.
Grease and oil can be removed with most standard cleaning fluids. For safety, use a
nonflammable cleaning fluid.
TROUBLESHOOTING
The position of the strikers can shift over time,
causing problems closing and latching the lid.
To fix this problem, loosen the screws holding
the strikers in position on either side of the
toolbox. Adjust the position of the strikers until
the lockbar engages the strikers properly when
the lid closes. Tighten the screws securely.
9
Publicidad
