BTI EX 125-150 LV Manual Original página 27

 Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edg-
es are less likely to bind and are easier to con-
trol.
 Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the pow-
er tool for operations different from those intend-
ed could result in a hazardous situation.
Service
 Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the pow-
er tool is maintained.
Safety Warnings for Sander
 Use the machine only for dry sanding. Penetra-
tion of water into the machine increases the risk
of an electric shock.
 Pay attention that no persons are put at risk
through sparking. Remove any combustible
materials in the vicinity. Sparking occurs when
sanding metal materials.
 Caution, fire hazard! Avoid overheating the ob-
ject being sanded as well as the sander. Al-
ways empty the dust collector before taking
breaks. In unfavourable conditions, e. g., when
sparks emit from sanding metals, sanding debris
in the dust bag, micro filter or paper sack (or in
the filter sack or filter of the vacuum cleaner) can
self-ignite. Particularly when mixed with remain-
ders of varnish, polyurethane or other chemical
materials and when the sanding debris is hot af-
ter long periods of working.
 When working with the machine, always hold
it firmly with both hands and provide for a se-
cure stance. The power tool is guided more se-
cure with both hands.
 Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held more
secure than by hand.
 Products sold in GB only: Your product is fitted
with a BS 1363/A approved electric plug with in-
ternal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets,
it should be cut off and an appropriate plug fitted
in its place by an authorised customer service
agent. The replacement plug should have the
same fuse rating as the original plug.
The severed plug must be disposed of to avoid a
possible shock hazard and should never be in-
serted into a mains socket elsewhere.
Products sold in AUS and NZ only: Use a resid-
ual current device (RCD) with a rated residual
current of 30 mA or less.
1 609 92A 1SG • 11.11.15
Product Description and
Specifications
Read all safety warnings and all in-
structions. Failure to follow the warn-
ings and instructions may result in elec-
tric shock, fire and/or serious injury.
Intended Use
The machine is intended for dry sanding of wood,
plastic, metal, filler as well as coated surfaces.
Machines with electronic control are also suitable
for polishing.
The power tool is not suitable for stationary usage.
Technical Data
Random Orbital Sander
Art. No.
Preselection of orbital
stroke rate
Rated power input
No-load speed n
0
No-load orbital stroke
rate
Orbit diameter
Weight according to
EPTA-Procedure 01:2014
Protection class
The values given are valid for a nominal voltage [U] of
230 V. For different voltages and models for specific coun-
tries, these values can vary.
Product Features
The numbering of the product features refers to the
illustration of the machine on the graphics page.
1 Auxiliary handle
2 Screw for auxiliary handle
3 Thumbwheel for orbit frequency preselection
4 On/Off switch
5 Lock-on button for On/Off switch
6 Filter element (filter system for fine dust)
7 Dust box, complete (filter system for fine dust)
8 Sanding plate
9 Handle (insulated gripping surface)
10 Sanding sheet*
11 Screw for fastening the sanding plate
12 Extraction outlet
13 Vacuum hose*
* The accessories illustrated or described are not in-
cluded as standard delivery.
EX 125-150 LV
9 045 229

W 400
-1
min 5500–12000
-1
min 11000–24000
mm 4
kg 2.4
/II
English | 27