sparklike HANDHELD 3.0 Manual De Instrucciones página 9

9. USING THE SCREEN
1. When the ON/OFF button is switched ON,
Sparklike Handheld™ will perform a self test
where it checks itself for errors.
2.
The screen will automatically change when
all is tested OK
3. The first fixed screen after start up is a device
information screen.
4. This screen will be important when
communicating with the manufacturer.
5.
The information screen shows:
▶ Revision of the device
▶ Last calibration date
▶ Calibration status:
"CALIBRATION VALID",
"CALIBRATION SOON" or
"CALIBRATION EXPIRED"
▶ Current time
▶ Battery charge status
10. HOW TO CREATE A LOG FILE
1. From the main menu, scroll by turning the
encoder button, to the LOG ON/OFF menu.
2. Select this by pressing the encoder button
once.
3.
The next screen shows that the logging is to
be started.
4.
The device will suggest the following free log
name (number) available. If the suggested
number is OK, simply press the encoder
button to confirm.
5. By turning the encoder button the number
of the log file can be changed. One click will
increase or decrease the number with one.
6.
When measuring a text is displayed showing
that the logging mode is on and it will also
display the log file number.
6. Device is now ready to use
7. When the button is pressed for the first time
after start up, the measurement result will show.
8. The current time and battery charge status can
be seen on the screen.
9.
It will also indicate that the measurement has
not been logged. (see: How to create a log file)
9