Blackstone 6964 Manual Del Propietário página 6

OWNER'S MANUAL | ASSEMBLY GUIDE
Place the oven base on its back. Remove the four (4) M8
STEP 02
flange nuts from the four (4) oven feet.
Use the four (4) M8 flange nuts to attach the heat shield and four (4)
oven feet to the bottom of the oven base.
Slide the square stone into the upper oven chamber
STEP 04
brackets.
Center the round stone on the floor of the oven chamber.
With the help of another person, set the pizza oven into
STEP 06
the oven base.
Note: Take extra care not to damage the burners. do NoT let the
stones slide out.
06
Remove the eight (8) M6x12 screws from the oven body
STEP 03
side panels.
Use four (4) M6x12 screws to install one (1) side handle and two (2)
mica sheets to the oven body left side panel.
Repeat with the oven body right side panel.
Remove the one (1) M5 screw from the door handle. Use
STEP 05
the one (1) M5 screw to attach the door handle to the front of the
oven door.
Model: 6964
BLACKSTONEPRODUCTS.COM/SUPPORT