Publicidad
Idiomas disponibles
Idiomas disponibles
As show in the figure below, tap in expansion screws for fixation, hang the unit vertically and screw it
down with nuts, insert plastic plugs below it and screw down self-tapping screws.
b. Installation mode of top rear exhaust.
Incline downward by 3°
As show in the figure below, tap in expansion screws for fixation, hang the unit vertically and screw it
down with nuts, insert plastic plugs below it and screw down self-tapping screws.
Considering the mounting inclination of 3°,
this dimension will be determined on the
unit's mounting position relative to the
sidewall.
Packing seal
48
Ф 110 ~ Ф 120 round hole
Wall-through hole
1 mounting hole for
3-Ф8
expansion screws
2 mounting holes
for self-tapping
screw plastic plug
90
11
1 mounting holes
for expansion
screws
3-Ф8
2 mounting holes for self-
90
tapping screw plastic plug
V.3
Publicidad
