Operation/settings to be done only by the authorised dealer/specialist.
Dealer
Operation/settings to be done by the authorised dealer/specialist or user.
User
User
Weekly timer setting
Promotes energy saving by allowing you to set up to 6
programmes in any given day.
Lights up if Timer operation is selected
Indicates the next timer operation
programme
Programme number in a day
ON Timer
OFF Timer
1 Press
to enter the timer setting mode.
2 Press
or
to select your desired day.
3 Press
to confirm your selection.
4 "1" will be blinking, press
programme 1.
5 Press
to select ON or OFF timer.
6 Press
or
to select your desired time.
You can set
,
Temperature Thermo Shift setting.
7 Press
to confirm programme 1. The selected
day will be highlighted with ▼.
• After 2 seconds, the display will move to the
next programme. Repeat steps 4 to 7 to set
programmes 2 to 6.
• During timer setup, if no button is pressed within
30 seconds, or if the
that moment is confirmed and timer setup is ended.
To check current timer programme
1 Press
to enter timer mode and press
to enter day setting.
2 Press
or
until your desired day is shown,
press
to confirm your selection.
3 Press
or
to check the set programmes.
Indicates the next timer
operation day
Day to be selected
to set
,
and the Water
is pressed, the setting at
To modify current timer programme
or add new timer programme
1 Perform steps 1 to 7 of "Weekly timer
setting" to modify existing timer programme, or
add any timer programme.
To cancel current timer programme
1 Press
to enter day.
2 Press
or
until your desired day is shown,
press
to enter programme setting.
3 Press
or
until your desired day is shown.
Press
to cancel the programme and ▼ will
disappear.
To disable/enable Weekly Timer
• To disable weekly timer setting, press
press
.
• To enable previous weekly timer setting, press
then press
.
, then
,
11