Publicidad
Product identification:
Manufacturer:
Address:
This declaration of conformity is issued under the sole responsibility of the manufacturer.
The object of the declaration described above is in conformity with the relevant statutory requirements:
Supply of Machinery (Safety) Regulations 2008 (S.I. 2008 No. 1597), and related amendments
Electromagnetic Compatibility Regulations 2016 (S.I. 2016 No. 1091), and related amendments
Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012
(S.I. 2012 No. 3032), and related amendments
UK marking:
Designated standards used or technical specifications in relation to which conformity is declared:
Reference number / Date of issue
EN ISO 13849-1:2015
EN 60947-4-1:2010/A1:2012
EN 62061:2005/A2:2015
Name, address of authorized person to compile the technical file:
Name, address of the independent conformity assessment body:
Number of the certificate of the independent conformity assessment body:
Signed for and on behalf of:
Siemens Aktiengesellschaft
Amberg _______________________ 2022-08-29
Place
Dr. Klaus Orth
Head of Research & Development
i.V.
Name / function
This declaration is an attestation of conformity with the indicated statutory requirements but does not imply any guarantee of quality or durability.
The safety instructions of the accompanying product documentation shall be observed.
Siemens Aktiengesellschaft: Chairman of the Supervisory Board: Jim Hagemann Snabe;
Managing Board: Roland Busch, Chairman, President and Chief Executive Officer; Cedrik Neike, Matthias Rebellius, Ralf P. Thomas, Judith Wiese; Registered offices: Berlin
and Munich, Germany; Commercial registries: Berlin-Charlottenburg, HRB 12300, Munich, HRB 6684; WEEE-Reg.-No. DE 23691322
Technische Änderungen vorbehalten. Zum späteren Gebrauch aufbewahren.
Subject to change without prior notice. Store for use at a later date.
UK Declaration of Conformity
Contactors
3RT2.3.-
, 3RT2.4.-
Siemens AG, SI EP
DE-92220 Amberg
Date of issue
signature
Reference number / Date of issue
EN IEC 63000:2018
Siemens plc
Manchester M20 2UR, UK
TÜV SÜD Product Service GmbH
Ridlerstr. 65 80339 München
M6A 038717 0068
Christian Grosch
Head of Quality Management
i.V.
Name / function
U3444.00
signature
3ZX1012-0RT20-4AA1
© Siemens AG 2016
Publicidad
