Operation; Selected Condition Of Auto Scan, Manual Scan, Or Test - AD Instruments AD210 Manual De Usuario

_______________________________________________________________________________

Operation

Warning: when users see "Overheated" warning shown in
LCD:
1. Users must wait during this "Overheated: cooling" period before they start next simulation.
2. And if users would like to turn the unit off, they must wait for another 3 min. (at least) for
the cooling fan to cool off the internal components.
Warning: When using batteries as the power source,
please do not plug in an AC adaptor. Or the power source
will be stopped and the data will disappear.
Note: When pressing any button, users will hear a sound of
buzzer.
seconds, users will hear another sound of buzzer.

Selected Condition of Auto Scan, Manual Scan, or Test

A-1
Users should first select AUTO SCAN (
of a solar panel.
Press button to turn on the Analyzer. Properly connect the pair of Kelvin clips to the
solar panel and the Analyzer. The red Kelvin clip is for positive pole and the black Kelvin
clip for negative pole.
Press button to start AUTO SCAN. After the scanning is finished, the result will come
out like below.
©Copyright Abacanto Digital SA.
When keeping pressing it for more than 2
Manual de usuario AD210
) to obtain a general idea of characteristics
AD Instruments
9