Publicidad
Idiomas disponibles
Idiomas disponibles
PROTECTION AGAINST ELECTRIC CURRENT
! If you use the device in a swimming pool, garden
pond or similar water reservoirs, it is necessary to in-
stall an additional switch for protection against electric
shock. Keep this switch in working order to ensure the
safety and reliability of the device.
! The electrician responsible for the installation must
check that the electrical connections and the earthing
terminal comply with the electrical regulations.
! This device is only allowed to be used if it is con-
nected to the electrical outlet. circuit with 30 mA
current protector.
! The device has a plug-in power cord with a protec-
tive pin. The electrical outlet must be grounded.
Defects caused by a short circuit on the supply are
not covered by the warranty!
SAVE THESE SAFETY INSTRUCTIONS !!!
DESCRIPTION
A. A bottle of detergent
B. Water filter
C. Quick coupler
D. Extension tube
E. Adjustable nozzle
F. Pistol
G. High pressure hose
Pictograms
Pictograms listed on the product packaging:
a) Power values
b) Power input
c) Working pressure
d) Maximum pressure e) Working flow
USE AND OPERATION
ASIST tools and devices are intended for home or
hobby use only.
The manufacturer and importer do not recommend
using this tool in extreme conditions and under heavy
loads.
Any other additional requirements must be subject
to agreement between the manufacturer and the
customer.
A. Insert the extension tube (D) into the gun (F).
Push the extension tube (D) into the gun (F) and turn
clockwise until it snaps into place. When the parts are
properly connected, the two parts cannot be sepa-
rated by pulling directly on the gun (F).
In the same way, insert the nozzle with the cleaning
agent, depending on which attachment is most suit-
able for the surface being cleaned. Only one attach-
ment can be inserted into the gun at a time. All attach-
ments must be inserted into the gun for proper use.
B. Insert the adjustable spray nozzle (E) into the ex-
tension tube (D); as this is a quick coupler, just push
it onto the extension tube (D) straight and forcefully
until it snaps into position. When the parts are prop-
erly connected, the two parts cannot be separated by
pulling directly on the extension tube (D).
Insert the turbo nozzle in the same way, depending
on which attachment is most suitable for the surface
being cleaned. Only one attachment can be inserted
into the extension tube (D) at a time. All attachments
must be inserted into the extension tube (D) for
proper use.
Connect the high pressure hose (G) to the water
outlet of the high pressure cleaner. Slide it in and
connect with a quick coupler to prevent leaks. When
these pieces are properly connected, the two parts
cannot be separated by pulling directly from the water
outlet.
Connect the high pressure hose (G) to the gun (F).
Slide it in and connect with a quick coupler to prevent
leaks. When these pieces are properly connected, the
two parts cannot be separated by pulling directly from
the gun (F).
Insert the cleaning agent nozzle (A) into the gun (F).
Push the detergent nozzle (A) into the gun and turn it
clockwise until it clicks into place. When the parts are
properly connected, the two parts cannot be sepa-
rated by pulling directly on the gun (F).
Startup
After connecting the high-pressure cleaner to the cold
water supply, proceed as follows:
56
Publicidad
