Publicidad
Idiomas disponibles
Idiomas disponibles
• When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or a fire.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact acci-
dentally occurs, flush with water. If liquid contacts
eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
• Do not use a battery pack or tool that is dam-
aged or modified. Damaged or modified batteries
may exhibit unpredictable behavior resulting in fire,
explosion or risk of injury.
• Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or tem-
perature above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions. Charging im-
properly or at temperatures outside the specified range
may damage the battery and increase the risk of fire.
SERVICE
• Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES FOR
HEDGE TRIMMERS
•
Keep all parts of the body away
DANGER
from the blade. Do not remove cut
material or hold material to be cut when blades
are moving. Blades continue to move after the
switch is turned off. A moment of inattention while
operating the hedge trimmer may result in serious
personal injury.
• Carry the hedge trimmer by the handle with the
blade stopped and taking care not to operate
any power switch. Proper carrying of the hedge
trimmer will decrease the risk of inadvertent starting
and resultant personal injury from the blades.
•When transporting or storing the hedge trimmer,
always fit the blade cover. Proper handling of the
hedge trimmer will decrease the risk of personal
injury from the blades.
•When clearing jammed material or servicing the
unit, make sure all power switches are off and
the battery pack is removed or disconnected.
Unexpected actuation of the hedge trimmer while
clearing jammed material or servicing may result in
serious personal injury.
• Hold the hedge trimmer by insulated gripping
surfaces only, because the blade may contact
hidden wiring. Blades contacting a "live" wire may
make exposed metal parts of the hedge trimmer
"live" and could give the operator an electric shock.
• Keep all power cords and cables away from
cutting area. Power cords or cables may be hidden
in hedges or bushes and can be accidentally cut
by the blade.
•Do not use the hedge trimmer in bad weather
conditions, especially when there is a risk
of lightning. This decreases the risk of being
struck by lightning.
•Do not use tool while standing on unstable
support. Stable footing on a solid surface enables
better control of the tool in unexpected situations.
•To reduce the risk of injury, user must read op-
erator's manual. Risk of eye injury. Always wear
eye protection, hearing protection, and protective
clothing and footwear. Keep bystanders at least 15'
away during use. Objects may be thrown or ricochet
in all directions. Avoid accidental startup; do not pick
up or carry tool by trigger. Always remove battery
pack before making adjustments or storing. Do not
expose to rain; store indoors. Use M12™ batteries.
• Before starting the trimmer check the work area
for hidden objects, such as wires, fencing, etc.
Striking a solid object could cause loss of control
and serious personal injury.
• Do not start the trimmer with blade in contact
with an object. Allow tool to reach full speed before
starting the job.
• Never cut any material with a diameter larger
than 1/2". The tool may stall or kickback, causing
a risk of injury.
• Always remove the battery pack when tool is not
in use.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
•
Some dust created by power sanding,
WARNING
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
filter out microscopic particles.
SPECIFICATIONS
Cat. No. ..................................................... 2533-20
Volts.............................................................. 12 DC
Battery Type .................................................M12™
Charger Type................................................M12™
Blade Length ....................................................... 8"
Cutting Capacity (diameter) .............................. 1/2"
Cutting Speed ........................................ 2700 SPM
Recommended Ambient
Operating Temperature .......................0°F to 125°F
3
Publicidad
