Publicidad
Idiomas disponibles
Idiomas disponibles
EN-18
4.5
Unit Menu
You can activate the desired units with the menu
Reset
Gram (g)
Kilogram (kg)
Pound (lb)
Ounce (oz)
Pound:Ounce (lb:oz)
End
NOTE: Available units vary by model. In addition, due to national laws, the scale may not include some of
the units listed.
4.6
USB Menu
You can define the communication parameters with this menu. Factory default settings are shown in bold.
Menu
Sub-Menu
Reset
Baud Rate
Parity
Stop Bit
USB
Handshake
U.S.b
(
)
Alt Print CMD
Alt Tare CMD
Alt Zero CMD
End
NOTE: / indicates that it is not applicable in the table above.
Reset
Reset the RS232 menu to factory defaults.
NO
= do not reset.
YES
= reset
Baud Rate
Set the baud rate (bits per second).
600
= 600 bps
1200
= 1200 bps
2400
= 2400 bps
4800
= 4800 bps
9600
= 9600 bps
19200
= 19200 bps
Parity
Set the data bits and parity.
7-EuE
= 7 data bits, even parity
7-ODD
= 7 data bits, odd parity
8-NOE
= 8 data bits, no parity
Stop Bit
Set the number of stop bits.
1 bit
= 1 stop bits
bit
2
= 2 stop bits
Handshake
Set the flow control method. Hardware handshaking is only available for COM1 menu.
NONE
= no handshaking
On.OFF
= XON/XOFF software handshaking
U.N.I.t
.
Sub-Menu
Options
(In segment)
reset
no, yes
BAUd
600, 1200, 2400, 4800, 9600,
19200
PArIt
7-Even, 7-Odd, 8-None
StOP
1 bit, 2 bit
SHAKE
None, Xon/Xoff
ALt.P
'A' - 'Z', P
ALt.t
'A' - 'Z', T
ALt.Z
'A' - 'Z', Z
ENd
/
Courier 5000
Options (in segment)
NO, yes
/
7-EuE, 7-Odd, 8-NOE
1 bit, 2 bit
NONe, On.OFF
/
/
/
/
Publicidad
