Aiwa ACD18-KBTU Manual Del Usuario página 13

There are 3 methods to add the device.
3-BLUE TOOTH MODE
1.
Power on the indoor unit, no need to launch
the air conditioner.
2.
Click "+" in the upper right corner of the
"Home" screen or tap "Add device" on the
room which has no device.
3.
Tap the "Air conditioner(BT+Wi-Fi)" logo.
4.
Make sure Blue tooth of your smart phone is
available.
5.
Tap in the upper right corner and choose
"Bluetooth" then follow the comments on
the screen to reset the Wi-Fi module then
check "Confirm the blue tooth is reset" and
tap"Next".
6.
Select one of the found device and tap " +"
7.
Input the password of the Wi-Fi which the
same as your smart phone connected, then
tap "Next".
8.
You can see the percent rate of connecting
process, at the same time
"PP","SA","AP" shining in turn on the indoor
display.
"PP" means "Searching the router"
"SA" means "connected to the router"
"AP" means "connected to the server"
Rename the
device
Select the
location
room
Acd18-kbtu/ Acd24-kbtu 13
EN